SACC-DSI-FS-5CON-L180 SCO

https://www.phoenixcontact.com/gb/products/1542761 Panel feed-through - SACC-DSI-FS-5CON-L180 SCO - 1542761 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Sensor/actuator flush-type socket, 5-pos., M12 SPEEDCON, A-coded, rear/screw mounting with Pg9 thread, with straight solder connection Why buy this product  Easy PCB assembly: one-piece connectors for wave soldering  All standard pin assignments and codings for signal, data, and power transmission with a uniform design-in design  SPEEDCON fast locking system reduces cabling times Key Commercial Data Packing unit 20 STK Minimum order quantity 20 STK GTIN GTIN 4046356097772 Weight per Piece (excluding packing) 13.960 g Custom tariff number 85366990 Country of origin Germany Technical data Dimensions Length of the solder pin 6 mm Ambient conditions Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket) -40 °C ... 85 °C (without mechanical actuation) Degree of protection IP67 General Note The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using 01/20/2017   Page 1 / 5 https://www.phoenixcontact.com/gb/products/1542761 Panel feed-through - SACC-DSI-FS-5CON-L180 SCO - 1542761 Technical data General a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. Rated current at 40°C 4A Rated voltage 60 V Rated surge voltage 1.5 kV Number of positions 5 Insulation resistance ≥ 100 MΩ Coding A - standard Standards/regulations M12 connector IEC 61076-2-101 Status display No Overvoltage category II Degree of pollution 3 Connection method Solder pins Insertion/withdrawal cycles > 100 Torque 3 Nm ... 4 Nm (Installation-side) Mounting type Rear mounting Pg9 With flat nut Material Flammability rating according to UL 94 V0 Contact material CuZn Contact surface material Au Contact carrier material PA 66 Material, knurls Zinc die-cast, nickel-plated Sealing material FKM (O-ring on housing) NBR (Internal O-ring) Standards and Regulations Standard designation M12 connector Standards/regulations IEC 61076-2-101 Flammability rating according to UL 94 V0 Environmental Product Compliance China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings 01/20/2017   Page 2 / 5 https://www.phoenixcontact.com/gb/products/1542761 Panel feed-through - SACC-DSI-FS-5CON-L180 SCO - 1542761 Dimensional drawing Schematic diagram max.4,5 3 4 Ø15,3 +0,1 5 13,5 +0,1 2 1 Pin assignment M12 socket, 5-pos., A-coded, socket side view 1x45° Housing cutout for Pg9 fastening thread, mounting panel with feedthrough hole (alternatively with area as anti-rotation protection for panel thicknesses > 2 mm up to max. 4.5 mm) Drilling diagram Dimensional drawing 18 Ø5 9,5 23 3 SW17 PG9 SW19 6,5 max. 4,5 Ø1,2 M12 flush-type connector Dimensional drawing 8 6, 18 6, 6 45° M12 front view Classifications eCl@ss eCl@ss 4.0 27250313 eCl@ss 4.1 27250313 eCl@ss 5.0 27143423 eCl@ss 5.1 27143423 eCl@ss 6.0 27143423 eCl@ss 7.0 27449001 01/20/2017   Page 3 / 5 https://www.phoenixcontact.com/gb/products/1542761 Panel feed-through - SACC-DSI-FS-5CON-L180 SCO - 1542761 Classifications eCl@ss eCl@ss 8.0 27440103 eCl@ss 9.0 27440102 ETIM ETIM 3.0 EC002061 ETIM 4.0 EC002061 ETIM 5.0 EC002061 ETIM 6.0 EC002061 UNSPSC UNSPSC 6.01 31261501 UNSPSC 7.0901 31261501 UNSPSC 11 31261501 UNSPSC 12.01 31261501 UNSPSC 13.2 39121413 Approvals Approvals Approvals cULus Recognized / EAC Ex Approvals Approval details cULus Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  E221474-20140616     mm²/AWG/kcmil 22-20 Nominal current IN 4A Nominal voltage UN 60 V EAC      B.01742 01/20/2017   Page 4 / 5 https://www.phoenixcontact.com/gb/products/1542761 Panel feed-through - SACC-DSI-FS-5CON-L180 SCO - 1542761 Accessories Accessories Protective cap Screw plug - PROT-M12 - 1680539 An M12 screw plug for the unoccupied M12 sockets of the sensor/actuator cable, boxes and flush-type connectors     Screw plug - PROT-M12 SH - 1503302 An M12 screw plug for the unoccupied M12 sockets of the shielded sensor/actuator cable, boxes and flush-type connectors     Screw plug - PROT-M12 FB - 1555538 M12 high-grade steel screw plug, for unoccupied M12 sockets of the sensor/actuator cables, boxes and flush-type connectors for the food industry     Seal Flat gasket - SACC-PG9-SEAL CLM - 1556320 Pg9 flat gasket for the rear mounting of M12 flush-type connectors with Pg9 fastening threads     Phoenix Contact 2017 © - all rights reserved http://www.phoenixcontact.com 01/20/2017   Page 5 / 5